User guide

5. Advanced operation
5.2.2 Phase
This menu item is only accessible when VGA input is selected.
About phase
The Phase can be manually adjusted by following this procedure.
To manually adjust the phase
1. Bring up the OSD main menu.
2. Navigate to the VGA menu.
3. Enter the Phase submenu.
The command bar Phase is highlighted and a small pointer appears to the left of it.
4. Set the phase as desired and confirm.
5.2.3 Clock
This menu item is only accessible when VGA input is selected.
About clock
The Clock can be manually adjusted by following this procedure.
To manually adjust the clock
1. Bring up the OSD main menu.
2. Navigate to the VGA menu.
3. Enter the Clock submenu.
The command bar Clock is highlighted and a small pointer appears to the left of it.
4. Set the clock/line as desired and confirm.
5.2.4 Horizontal image position
This menu item is only accessible when VGA input is selected.
To adjust the horizontal image position
1. Bring up the OSD main menu.
2. Navigate to the VGA menu.
3. Enter the H Postion submenu.
The command bar HPositionis highlighted and a small pointer appears to the left of it.
4. Set the horizontal image position as desired and confirm.
26
(451920611082)K5902070 MSMD-1119 & MSMD-1119-TS 05/12/2013