User guide

5. Advanced operation
4. Select the Factory set option and confirm
5.1.5 Power saving
About power saving
When power saving is enable, the display will go in standby mode (backlight off, low power mode) when
no signal is available on the selected input.
To enable/disable power saving
1. Bring up the OSD main menu.
2. Navigate to the Display menu.
3. Enter the Power saving submenu.
The command bar Power saving is highlighted and a small pointer appears to the left of it.
4. Enable/disable power saving and confirm.
5.1.6 Touchscreen (only for MSMD-1119-TS)
About the touchscreen
The touchscreen can be disabled for cleaning purposes.
To enable/disable the touchscreen
1. Bring up the OSD main menu.
2. Navigate to the System menu.
3. Enter the Touchscreen submenu
The command bar Touchscreen is highlighted and a small pointer appears to the left of it.
4. Enable/disable the touchscreen as desired and confirm.
5.2 VGA me nu
This menu item is only accessible when VGA input is selected.
5.2.1 Geometry Adjustment
About geometry adjustment
When geometry adjustment is activated, all geometrical parameters are adjusted to fit he image on the
screen (full screen image required).
To activate auto adjustment
1. Bring up the OSD main menu.
2. Navigate to the VGA menu.
3. Enter the Geometry Adjustment submenu.
The automatic geometry adjustment is activated.
(451920611082)K5902070 MSMD-1119 & MSMD-1119-TS 05/12/2013
25