User guide

5. Advanced operation
5.1.4.1 Keyboard lock
About the keyboard lock
It is possible to lock the keyboard. When locked all keys (except standy key) are locked. To unlock the
keyboard see "Keyboard unlocking", page 19.
To lock the keyboard
1. Bring up the OSD main menu.
2. Navigate to the Display menu, then enter the Advanced menu submenu.
3. Enter the Keyboard lock submenu.
The command bar Keyboard lock is highlighted and a small pointer appears to the left of it.
4. Set the Keyboard lock value as desired and confirm.
5.1.4.2 VGA auto adjust
About VGA auto adjust
When VGA auto adjust is enabled, the phase, position and gain will be automatically
adjusted when a
VGA signal is applied.
To enable/disable VGA auto adjust
1. Bring up the OSD main menu.
2. Navigate to the Display menu, then enter the Advanced menu submenu.
3. Enter the VGA auto adjust submenu.
The command bar VGA auto adjust is highlighted and a small pointer appears to the left of it.
4. Enable/disable the VGA auto adjust as desired and confirm.
5.1.4.3 Factory set
About the factory set option
When the factory set option is activated, following parameters will be restored to their original factory
values:
• Luminance (70)
• OSD menu off timer (10s)
• OSD language (English)
•OSDdirection(0°)
• OSD horizontal position (0)
• OSD vertical position (0)
• OSD menu blend (8)
• VGA auto adjust (Off)
• Power saving (On)
• Touch screen (On) (only for MSMD-1119-TS)
• Keyboard lock (Unlocked)
To reset the display
1. Bring up the OSD main menu.
2. Navigate to the Display menu, then enter the Advanced menu submenu.
3. Enter the Factory set submenu.
The command bar Factory s et is highlighted and a small pointer appears to the left of it.
24
(451920611082)K5902070 MSMD-1119 & MSMD-1119-TS 05/12/2013