User guide

3. Installation
2
1
1
Image 3-11
For displays t o be mounted on a VESA arm without internal cable routing provi-
sions
1. Remove the cable routing expansion clip from the connector compartment cover.
2. Slide the connector compartment cover upwards so that it fits onto the display.
3. Reattach the connector compartment cover by tightening the fixation screw .
3
2
2
1
Image 3-12
Warning:The protection against ingress of water IP33 will be void when installing the display with the
cable routing expansion clip removed from the connector compartment cover.
3.2.7 Step 7: Stand/handle mounting or VESA arm mounting
Different mounting positions for stand and handle
The stand/handle and display consist of different mounting holes. Depending on the desired mounting
position and applicable VESA standard (75 mm or 100 mm), different mounting holes should be used.
Below is an overview of all options and which mounting holes to use for each configuration.
(451920611082)K5902070 MSMD-1119 & MSMD-1119-TS 05/12/2013
13