User manual

English
30
WitboxUser Manual
To change the lament during printing, press the control wheel and do the following:
1
Select the Change lament option. The printer will stop automatically and the
following message will appear on the screen: Press & unload l.
2
Press the wheel again and then unload the lament as swiftly as possible. The
screen will then display the message Press to continue. Select this option once
you have removed the lament completely.
3
The screen will now display the message Load new lament. Load the new lament
into the printer.
Make sure the polymer is extruded from the nozzle continuously and uniformly.
4
After making sure the polymer is extruded from the nozzle continuously and
uniformly, press the control wheel to restart the printing process.