User`s guide

2
Introduction
Intended Use
Super CPAP Battery Packs are intended to provide external power to CPAP
and BiLevel machines; however, they may aslo be used to power other
devices that operate from a 12V DC current such as cell phones, portable
DVD players, iPads and laptops.
Please note that use of the Battery Pack with a device that requires more
than 12V output may cause the Battery Pack’s internal circuitry to shut off
to protect from overrun.
Compatibility
CPAP Battery Packs are compatible with most makes and models of CPAP
and BiLevel machines; however, some machines require the additional
use of a sine wave inverter or a DC converter to complete the connection
between the Battery Pack and the device. Please refer to the Sine Wave
Inverter or DC Converter Usage section on page 3 for more information.
The DC power cord included with the Battery Pack may not be compatible
with your CPAP or BiLevel machine. Some manufacturers require the use
of a specific DC adaptor cable with built-in fuses or special connection
types. When in doubt, please contact the manufacturer of your device.
Below is the contact information for the most common CPAP and BiLevel
machine manufacturers.
Respironics 1-800-345-6443 www.respironics.com
ResMed 1-800-424-0737 www.resmed.com
Fisher & Paykel 1-800-707-5454 www.fphcare.com
Invacare 1-800-333-6900 www.invacare.com
DeVilbiss 1-800-338-1988 www.devilbisshealthcare.com
Puritan Bennett 1-800-635-5267 www.puritanbennett.com