User`s guide

11
Battery Pack Operation
Connection Via 150 Watt Sine Wave Inverter
 Connect the DC power pigtail cord to the DC Out Jack on the Battery
Pack(s). Connect the DC input cord to the DC power pigtail cord.
 Connect the inverter adaptor cord to the side of the inverter. Connect
the opposite end of the inverter adaptor cord into the DC input cord of
the Battery Pack.
 Connect the regular AC power cord of your CPAP or BiLevel machine to
the inverter by sliding open the small spring loaded tab which will
reveal the two-prong plug (located on the back of the inverter).
DC Power
Pigtail Cord
CPAP DC Input Port
DC Input Cord
Inverter
Battery Pack(s)
CPAP AC Power Supply
Inverter
Adpator Cord
 Once the connection between the Battery
Pack, inverter and the machine is complete,
press the ON/OFF button on the CPAP/
BiLevel machine and your machine should
start functioning.







