User`s guide

10
Battery Pack Operation
Connector Tips
If the DC power cord included with your Battery Pack will not directly and
tightly fit in the CPAP/BiLevel machine you will need to use one of the
connector tips provided to complete the connection between the Battery
Pack and the machine.
 Locate the DC input port on the CPAP/BiLevel machine.
 Try to insert a connector tip into the DC input port on the machine and
then gently try to plug the connector tip into the end of DC power
pigtail cord included with the Battery Pack.
 Test all of the connector tips. Even if you find that one works, there
may be another connector tip that fits more tightly in your machine.
You want to avoid using a loose tip if there is a better match.
 Once you have found the best connector tip, store it in a separate
place away from the other tips for easy retrieval when you want to
use your Battery Pack.
DC Power
Pigtail Cord
Connector Tip
CPAP DC Input Port


