User`s guide

9
Direct Connection
If you are not using a ResMed model or other 24V machine and your
machine has a DC input port you can connect your machine directly to the
Battery Pack. DO NOT connect the Battery Pack directly to any ResMed
model machine or any other 24V device.
 Connect the DC power pigtail cord included with your Battery Pack
to the DC Out Jack on the Battery Pack. C-100 Battery Packs are
sold in single and double configuration packages.
If you are using two C-100 Battery Packs connect the DC power
pigtail cord to both Battery Packs.
 Connect the DC power pigtail cord to the DC input port located on
the CPAP or BiLevel machine. If the DC power pigtail cord will not
directly and tightly fit in the CPAP machine please refer to the
Connector Tips section on page 10.
 Once the connection between the Battery Pack and the machine is
complete, press the ON/OFF button on the CPAP/BiLevel machine.
Your machine should start functioning.
Battery Pack Operation
SINGLE CONFIGURATION
DOUBLE CONFIGURATION
Battery Packs

CPAP DC
Input Port

DC Power
Pigtail Cord

DC Out Jack
