User`s guide

7
Getting Started
Turning the Battery Pack On/Off
The Battery Pack will turn on or off automatically when a device is plugged
into or disconnected from the Battery. If the Battery Pack stops
functioning, reconnect the AC charger to the Battery Pack to reset the
internal circuitry. This will allow the Battery Pack to function again.
Charging with AC Power
Before using your Battery Pack for the first time be sure to charge it fully
using AC power. The Battery Pack does not need to be fully discharged
before charging.
 Connect the output cable of the AC power supply included with your
Battery Pack to the DC In Jack.
 Connect the power cord of the AC power supply to a wall outlet.
 After you have fully charged your Battery Pack the Full Charge Light
and the four LED lights will display green.
 When charging is complete disconnect the AC power supply and cord
and store it for future use.
DC In Jack

AC Power Supply
