Instruction manual

Replace printer head

! DON’T GRIDE THE PRINTER HEAD.

Take out printer head.

• Power off and take out the power cable from electrical outlet.

• Take away platter.

• Open printer door, pull out printer.

• Screw out 2 screws (J) for fixing printer head.

• Pull out the harness from printer head.

• Take away printer head.

Install printer head

• Insert the printer head harness.

• Put the printer head and spacer to right position. Screw down 2 bolts.

• Close the printer head.

• Push the printer back to scale.

• Put on platter.

• Power on scale.