Instruction manual

Hanging type:

bPro-H2

Take out printer

• Power off and take out the power cable from electrical outlet.

• Take away platter.

• Open right door of scale.

• Screw out 3 bolts (N3) at the bottom of the printer.

• Take out all harness in printer PCB.

• Take out printer.

Install printer

• Insert the harness of the printer PCB.

• Put the printer to right position and insert to scale carefully.

• Screw down 3 bolts for fixing the printer.

• Close printer door.

• Install whole hanging scale.

• Put on platter.

• Power on scale.