Instruction manual

Replace keyboard

Counter type

Take out keyboard

• Power off and take out the power cable from electrical outlet.

• Take away platter.

• Screw out 3 bolts (H) in keyboard at bottom.

• Take out keyboard and cover kits.

• Pull out the harness of keyboard from the keyboard convert PCB.

• Rip off the keyboard overlay, take out it.

Install keyboard

• Clean the keyboard cover with alcohol, and wait it till dry.

• Let harness through the hole in it and rip off the protect paper in keyboard, then

stick it to the keyboard cover.

• Plug in the harness to keyboard convert PCB.

• Put the keyboard to right position and install 3 bolts in it.