Instruction manual

• Power off and take out the power cable from electrical outlet.

• Take away platter.

• Screw out 2 bolts (G3) for fix the left cover.

• Take out the cover.

• Screw out 2 bolts (H3) in base.

• Take away A/D convertor kit (I3).

• Screw out 2 bolts (J3),take out the cover.

• Screw out bolt (K3) and bolt (L3) for connecting load cell.

• Screw out 2 bolts (M3).

• Take out loadcell.

Install loadcell

• Put the loadcell to right position.

• Use reverse steps to install the load cell as previous take out steps.