Instruction manual

83
Take out loadcell
• Power off and take out the power cable from electrical outlet.
• Take away platter.
• Screw out 2 bolts for fix the cover of print paper (D).
• Take out the cover (E).
• Screw out 2 bolts in interface PCB (F).
• Screw out 4 bolts in up spider, and take out it.
• Open the sealing screw (G).
• Take away up cover.
• Pull out loadcell harness from main PCB.（see above to find the main PCB）
• Screw 2 screws in loadcell and take out spacer.
• Also take out loadcell spacer.
• Also screw 2 screws for installing loadcell under the scale.
• Take away loadcell.
Install loadcell
• Put the loadcell to right position.
• Install 2 screws from scale bottom.