Instruction manual

• Install the tower to base.

• Put on platter.

• Power on scale.

Hanging type:

bPro -H2

Take out display

• Power off and take out the power cable from electrical outlet.

• Take away platter.

• Take out back display kit as previous method.

• Take away display harness in display.

• Screw out 4 bolts (F3) in the display support plate, and take out the back display.

• For front display, you should also take away the main PCB and power PCB, then to

show the front display, screw out 4 installation bolts.

Install display

• Put the back display to right position and screw in 4 bolts to fix it.

• Plug in harness of display.

• Install the back display kit.

• Install back display cover.

• Install whole hanging scale.

• Put on platter.

• Power on scale.