Instruction manual

• Put on platter.

• Power on scale.

Hanging type:

bPro -H2

Take out main PCB

• Power off and take out the power cable from electrical outlet.

• Take away platter.

• Screw out the 2 bolts (A3) from scale and take away.

• Screw out 4 bolts (B3) from scale and show main PCB.

• Pull out all connection from main PCB.

• Screw out 4 bolts (C3) from main PCB, take away it.

Install main PCB

• Put the main PCB to right position, screw in 4 bolts of main PCB.

• Connect all harness to main PCB.

• Put the display and power support kit to position, screw in 4 bolts.