Instruction manual

58
Network configure
This function used to set IP address, net mask, server IP, and router IP etc.
SERVICE MODE
_
21 NETWORK CONFIG
*
IP ADDRESS
_
NET MASK
_
SERVICE IP
_
ROUTE IP
_
IDLE TIME 10
_
MAC ADDRESS
_
_
After completing setup, if necessary you can choose the PLU SOURCE. The operation as bellow:
 K9* Call the menu "Technical service "
SERVICE MODE
_
21 NETWORK CONFIG
*______
PLU SOURCE 0-2
_
CODE
0.00 0.00 0.00
Enter the preset code 21.
Enter network configure
Input IP address
Input NET MASK address
Input SERVER IP address (If necessary)
Input ROUTE IP address (If necessary)
Input IDLE TIME (10 is ok)
Scale will restart automatically.
_
_
_
_
Enter the preset code 21.
0=Get PLU from local scale
1=Get PLU from NETWORK
2=First from network, then from local scale
Press
K to exit.