Instruction manual

56
loadcell and A/D pcb.
04【*】 "PUSH CAL BUTTON” Enter the menu，
press the calibration button
Display the high resolution. Press key【C】 to exit.
Primary configure
This function used to set the scale number.
08【*】
Enter the menu “Primary Config”
 (scale number)【*】
Input scale number
Reset ticket number
This function used to reset ticket number.
09【*】
Enter the menu
0or1
Select if reset it
0：no
1：yes
【*】
Clear BRAM
This function used to clear all the data in BRAM, including the PLU DATA, SET UP DATA
etc.
12【*】
Enter the menu
0or1
Select the item
0：not clear
1：clear
【*】
Fonts tabel
This function used to list the fonts table in scale.
13【*】
Enter the menu and print out the fonts list.