Instruction manual

55
34 CASH DRAW TEST Test the cash drawer
35 WIRELESS CONFG
If you use wireless scale, please
configure the wireless option here
38 PRINT MENU LIST
41 CHECK FONT START CHAR – END CHAR
Input the Unicode range of the char you
want to check.
Function test
This function used to test the display, keyboard and printer.
01【*】
Enter the function, and light on all the display to
check if the display is ok.
【*】
Display 1234... testing, then scale will print out a
ticket to check the printer.
At last which will test the keyboards, you should
press the key one by one according to the message.
Memory test
This function used to test scale memory.
02【*】
Enter the memory test, scale will test it
automatically, then print out the test report, also
give some information if something is wrong.
Interface test
This function used to test RS232 com part. Before the test you should shorten the PIN 2
and PIN 3 of the COM port.
03【*】
Enter the test and scale will give you message in 5
minutes.
After the test, take out shorten wire.
High resolution display
This function used to watch the high resolution of the scale. Use it you can check the