Instruction manual

54
Service function
Enter the menu【CODE】【9】【*】,display will show “SERVICE FUNCTION”, then do
following operation..
NO. MENU PARAMETER DESCRIPTION
01 FUNCTION TEST Test the scale display,keyboard etc
02 MEMEORY TEST Test scale memory
03 INTERFACE TEST Test scale RS232
04 HIGH RESOLUTION Display increment X10
05 CALIBRATION Calibrate the scale
08 PRIMARY CONFIG Set the scale number
09 TICKET NO. TO 0
0=no
1=yes
Reset the ticket number to zero.
13 FONTS TABLE Print out fonts table
15 WORK CONFIG
0＝CONFIG NO;
1=CONFIG YES
Reset scale
17 DELETE ALL PLU
0=no
1=yes
18 DELETE ALL GROUP
0=no
1=yes
19 DEL. ALL OPERATOR
0=no
1=yes
21 NETWORK CONFIG Set IP address of scale
22 SOFTWARE LOAD Enter update firmware state
24 TICKET PRINTER Test printer with ticket
25 LABEL PRINTER Test printer with label
26 CONFIG RS232
28 HEAD CLEAN ALERT
0=NOT CLEAR
1=CLEAR
0=DISABLE ALERT
1=ENABLE ALERT
29
CHG PAPER MSG
0=ENABLE IN PP.
1=DISABLE IN PP
32 COMM DEBUG
0=Enable
1=disable
33 ASSERT DEBUG
0=Enable
1=disable