Instruction manual

48
Keyboard configuration
Enter the menu【CODE】【3】【*】,display will show “KEYBOARD CONFIG”, then do
following operation.
Standard configuration
【01】【*】 display “CONFIG. NO”
press key: 0＝NO，1＝YES，then press【CODE】 key, and press 【CODE】 key
exit SETUP mode.
Function keys
【02】【*】 display “KEY ST ON 0-1”
 to active key “ST”, 0＝OFF (disable), 1＝ON (enable), press 【*】 key, display next
option “KEY R ON 0-1”;
 to active key “R”, 0＝OFF (disable), 1＝ON (enable), press 【*】 key, display next
option “KEY X ON 0-1”;
 to active key “X”, 0＝OFF (disable), 1＝ON (enable), press 【*】 key, display next
option “KEY - ON 0-1”;
 to active key “-”, 0＝OFF (disable), 1＝ON (enable), press 【*】 key, display next
option “KEY + ON 0-1”;
 to active key “+”, 0＝OFF (disable), 1＝ON (enable), press 【*】 key, display next
option “KEY # ON 0-1”;
 to active key “#”, 0＝OFF (disable), 1＝ON (enable), press 【*】 key, display next
option “KEY TARE ON 0-1”;
 to active key “TARE”, 0＝OFF (disable), 1＝ON (enable), press 【*】 key, display
next option “KEY FIX ON 0-1”;
 to active key “FIX”, 0＝OFF (disable), 1＝ON (enable), press 【*】 key, then press
key 【CODE】to exit the setting mode.
Special keys
【03】【*】 display “OPERATOR KEYS 1”
input the quantity of operator, then press key 【*】, display “NO IN/DECREASE 0-1”；
to select if use the DISCOUNT key, press key 0＝NO (disable)，1＝YES (enable),as select
“NO”, press key【*】, display “CONFIG NO 0-1”, then press 0（not save）/1（save），
press key 【*】to finish. As select “YES” to enable the DISCOUNT key, display “DISCOUNT
NO.”, then show “CONFIG NO 0-1”,press key 0（not save）/1（save）, press key 【*】
to finish.
press key 【CODE】 to exit SETUP mode.