Instruction manual

3
Customer/Vendor
Display
There are two displays on the scale, one is on the vendor side and the other is on the
customer side. They are all mounted on the tower except bPro-C2 model.
These two LCD displays incorporate a yellow color LED backlight. Both the customer
and vendor displays show 5 digits of weight, 5 digits of tare, 7 digits of unit price
and 7 digits of total price values along with cursors for Zero, Net and Prepack mode.
Both the customer and vendor displays can also show 16 alphanumeric characters
for commodity description, marquee and prompt messages during programming.
The Weight display characters are 13.2mm high by 8.16mm wide. The Tare
Weight, Unit price and Total Price display characters are 11mm high by 6.6mm
wide. The alphanumeric characters are 8.36mm high by 4.18mm. The display
legends definitions are shown in the figure below.
Another 240x240 full dot matrix display, this can enable display Chinese, Thai
language, Arabic etc, special offers to increase in-store scales.
Indicates that a ta
r
e has been
entered and the weight is NET.
The zero cursor indicates
that the scale is within the
zero range, either net or
gross zero. If the display
does not read 0.00 at
ready, press the zero key.
Shows the normal weight.
Shows the Tare weight.
Shows Unit price.
Shows Total price.
Shows PLU description