Instruction manual

97
6 Maintenance
External Cleaning
Turn the scale power off by placing the power switch to the OFF position (Press
the "0" on the power switch). Disconnect power cord from outlet.
Use a soft clean cloth dampened with a mild detergent and water (or a mild
cleaner) to wipe the exterior surfaces. Do not spray liquid directly on the unit. A
mild spray cleaner can be used by spraying the cleaning cloth.
Cleaning Printhead
Turn the scale off by placing the power switch to the OFF position.
Disconnect power cord from outlet.
Open the plastic door on the right side of the scale.
Slide out the printer.
Press the trigger to open the print head.
Clean the print head with a soft clean cloth soaked in isopropyl alcohol,
METTLER TOLEDO liquid cleaner or equivalent, or the METTLER
TOLEDO Cleaning Pen.
Push back the print head until it clicks.
CLEAN PRINTHEAD USING METTLER TOLEDO LIQUID CLEANER OR
EQUIVALENT OR THE METTLER TOLEDO CLEAN PEN.
DO NOT SCRAPE THE PRINTHEAD WITH ANY OBJECT TO REMOVE GLUE OR
LABEL DEBRIS OR SEVERE DAMAGE MAY RESULT.