Installation Guide

6485
D*1
POWER SOURCE
E*2
ANTI-FALL BRACKET
C*1
MOTOR REMOTE
B*1
BACK
A*1
BODY
No.1 wire connect the motor and the wire from motor remote(C),
which use to control the lift / recline function.
No.2 wire connect the motor and power source (D).
NOTE
1: Two same color wires
connect.
2: Plug power cord and power
source into outlet, then you
can use all function.
Power sonrce（D）
1
2
3
Motor Remote (C)
From motor
From motor remote
②
①
From power source
E
Insert chair back to the chair base,
make sure the slots on the back
fully assembled to the bottom part.
B*1
A*1