Installation Instructions

SERIES 5001

SLIDING GLASS DOOR

Page 17 of 19

FIGURE R

REFERENCE DIMENSION

Figure V

Step 18. Install hardware:

• The sash is prepared for hardware from the factory.

• Install per hardware installation instructions.

• Adjust the sash completely before keeper installation. Measure from the sill to the hardware

hook (see Figure V).

• Install the keeper per the hardware instructions.

• Maintain, clean, and lube the weather stripping with a tire lube or aluma lube to be sure it

slides properly.

• Align the tips of the keeper vertically. Measure from the sill to the top of the notch of the lower

hook location on the lock. Use this measurement to the top of the mating cut out notch in the

keeper (see Figure V).

• Adjust the keeper as necessary.