Installation Instructions

SERIES 5001
SLIDING GLASS DOOR
Page 14 of 19
Step 15. Install the operable panel (see Figure R).
• Adjust the rollers just high enough to operate freely through the clear adjustment holes at each
end (see Figure S).
Figure R
LIFT OVER ANTI TAKE OUT AND
SET ON ROLLER TRACK
INSTALL OPERABLE SASH.
TACK W/ SEALANT ON
ANTI TAKE OUT TO
PREVENT SLIDING
Lift over anti take-out
and set on roller track
Tack with sealant on anti
take-out to prevent sliding
Install Operable Sash
Figure S
FIXED PANEL
OPERABLE PANEL
ROLLER ADJUSTMENT HOLE
LOCATED ON EACH END
Fixed Panel
Operable Panel
Roller Adjustment Hole
located on each end