Installation Instructions

SERIES 5001
SLIDING GLASS DOOR
Page 8 of 19
Step 5. Fixed panel installation:
• Check the panels to make sure they are clean and that none of the seals show signs of
damage from shipping. Repair any damages and broken seals.
• Mark a 2½" reveal from the jamb track on the track of the head and the sill. This is the
location of where to install the fixed panel (see Figure G).
• Find the L2" × 2" × ¼" fixed panel anchors and the #10 × ¾ PHL PH TEK fasteners.
Figure G
HELPFUL HINT:
MARK WITH
PENCIL PRIOR TO
INSTALLATION
CAPSEAL AFTER INSTALLATION
BACKSEAL PRIOR TO INSTALLATION
Helpful hint: mark with
pencil prior to installation
Capseal after installation
Backseal prior to installation
2½"
2 ½"