Installation Instructions

SERIES 5001
SLIDING GLASS DOOR
Page 5 of 19
Step 3. Installation of transom (when transom is used) (see Figure D).
• Include prior frame installation, step 2.
• Apply sealant to the interior of the door frame track as shown, inside and out.
• Insert frame connecting “I”-shaped mullion as shown in Figure D.
• Apply sealant to the transom adjacent track and stack it onto the door frame.
• Sealant should ooze out of the joint. Tool and wipe clean.
• Use wood blocking to protect the frames and tracks while holding the frame sections
together with “C” clamps while erecting the frame (see Figure D).
• Fasten through the frame as shown.
Figure D
DOOR FRAME
HEAD
TRANSOM
SILL
TRANSOM
HEAD
TRANSOM
JAMB
SEALANT
TRANSOM
HEAD
TRANSOM
JAMB
TRANSOM
SILL
DOOR FRAME
HEAD
Sealant