Installation Instructions
SERIES 5001
SLIDING GLASS DOOR
Page 15 of 19
Step 16. Install the anti-takeout stop at the head.
• Slide the operable panel to the extreme on the fixed side. Caution: No stops are installed yet.
• Button the BAM-2041 stop up into the head, placing it to where the end does not pass the
fixed light glazing leg. Tack it in place with one or two fasteners (see Figure T).
• Operate to confirm operation and check to see that the end is just inside the meeting rail
interlocker. If you have problems buttoning it in, it may be trimmed slightly.
Figure T
INSTALL BAM-2041 ANTI TAKE-OUT CLIP
.25X2X2<
.25X2X2<
BAM-2041
FIGURE P
Install BAM-2041 Anti Take-Out Clip
BAM-2041