Installation Instructions

SERIES 5001
SLIDING GLASS DOOR
Page 13 of 19
#10 × ¾" Black PHL Screws
Figure Q
Step 12. Check the sealants and inspect to insure the frame and fixed panel are sealed tight.
• The fixed panel sealant, interior track cover, and threshold sealant are critical.
• Protect and allow sealant in the frame to skim over and cure prior the exterior sash installation.
Step 13. Install the “X” (Operable panel).
• Snap the BAM-2040 sill dam into position by placing the track notch at the jamb
(see Figure P). You may find it helpful to tack with sealant to prevent sliding.
Step 14. Install the interlock covers on the operable panel (see Figure Q).
#10 × ¾" Black PHL Screws
Top Cover
Operable Panel
Bottom Cover