User Manual

1. Long press the power button to turn on/oﬀ the transmitter and the receiver.

2. Pairing

Before leaving factory, the system is pre-paired. Therefore, the connection will be

established once they are powered on. If they are disconnected, please follow below

steps:

① Long press the SET button to enter menu screen

② Use the + or -button to display the Connect setting menu on both transmitter

and receiver.

③ Long press the SET button to select the menu.

④ Select Yes, and long press the SET button to conﬁrm.

⑤ Transmitter and receiver will be successfully paired within 10s.

3. Connect the receiver to the mic input of a camera, recorder or mixer with the

supplied 3.5mm TRS cable. Or connect the RX to a smartphone, tablet, or computer

with the supplied 3.5mm TRS to TRRS cable.

4. You are ready to record.

Operation Guide

RX TX