Introduction The BOYS BY-MITT i a compaction snd portal 2.4GHz wireless microphone system for up ta 2 peal, compatible with cameras, smartphones, tablets and more. t features automatic pairing and delectable nose cancel nation, delivering broadcast quay sound with remarkable ease of use. The BYWWMST2 Is IKEA! for content creation, Ive streaming, snogging. mobile journalism and much more.
Status Indicate Unpaid Blinks bus and red catalyst Successfully pared Salivate Mats ON Inks blow quickly (per sac and) Low battery Bis red {every s seconds) Noels Cancellation ON Inks bie slowly lever 25 seconds) Noels Cancellation OFF Solitude ‘Charging sad red Fully charged Ugh toff Nate: If charging the unt when It 5 ON, the Indicator will display the current working status Instead of charging status. 2. Power/Mute button Long press the button for 2 seconds to tum on/off the unit.
BY-WM3T2-RXU Status Indicator status unpaired Successfully paired 2.USB-C connector Indicator Binksbiue sold bi it can be connected to an Rancid phone, Tibet or other USB-C devices. 3. Us8-C charging port ‘When the BY MST ROU is plugged into an textual device, the textual device can be powered via this charging port. Mote: Most USB-C devices can be charges through this port, which alas supports C20, PD2.0 fast charging protocols.
BY-WM3T2-RXD 1. Status Indicator Status Windcheater Unpaid Inks blue ‘Successful paired Sold blue 2, Lightning connector It an be connected to an 105 Lightning device. 3. USB charging port Wuhan tha EY-WMST2 RXD ks plugged Into an textual device, tha textual device can be powered via this charging port.
BYWM3T2-RX35 1. Status Indicator Anus Indicator Unpaired Inks bue and rec ultimately Succassfulypaied | Said vibe Low Battery. Bis red {every 5 seconds] urging Soldered Fully charged Ugh toff Nita: If charging the unt when It 5 ON, the Indicator will display the current working status Instead of charging status. 2, Power Burton Lang press the button for 2 seconds to tum ON or OFF the unit. 3,USB-C charging port For charging the receiver.
How to Use For the kit of BY-WM3T2-U1/ BY-WM3T2-U2/ BY-WM3T2-D1/ BY-WM3T2-D2 1. Press and hold the parer button for 2 seconds to tum on the Transmitter. 2 Plug the BY-WMIT2-RXD Into an 105 device or tha BY WHAT 2-RXU Into a USB-C device. 3. Transmitters) and stereo will be automatically paired Within 10 seconds. 4. Your treacly to record. For the kit of BY-WM3T2-M1/ BY-WM3T2M2 1. Plug the BYWMSTZ-RXSS Rita a device with a 2.5mm TRS jack. 2 Press and hold the power button for 2 seconds to tum an the.