User manual

85
B
N
e
e
f
t
o
w
re
or
U
k
se
Control Software Application
1. Click button to leave this page.
2. Creston Control
Projector Name:
Displays the projector name used to identify the projector when connected to a network.
When editing, you can enter up to 14 single-byte alphanumeric characters.
Location:
Show the location where the projector is. When editing, you can enter up to 14 single-
byte alphanumeric characters.
Assigned To:
Displays the name used to identify who the projector is assigned to b y someone
who can manage a network.
When editing, you can enter up to 14 single-byte alphanumeric characters.
Click button to send and save the setting that you modify.
Projector’s Network Configuration
DHCP Enabled
A s s ign an IP addres s to the projector from the D H CP s erver
automatically.
IP Address
Set up IP Address when DHCP is disabled.
Subnet Mask
Set up Subnet Mask when DHCP is disabled.
Gateway
Set up Gateway when DHCP is disabled.
DNS Server
Set up DNS Server address when DHCP is disabled.
Click button to send and save the setting that you modify.
Admin Password
Enabled
Turn ON administrative password function if selected.
New Password
Enter administrative password (Max length: 15 characters).
Confirm
Password
Re-enter administrative password.
Click button to send and save the setting that you modify.
User Password
Enabled
Turn ON User password function if selected.
New Password
Enter administrative password (Max length: 15 characters).
Confirm
Password
Re-enter administrative password.
Click button to send and save the setting that you modify.