User manual

84
N
B
e t
o
w
r
o
e
r
U
k
se
Control Software Application
ITEM SETTING
DESCRIPTION
Power
Power On or Power Off the projector via network.
Vol + (Volume +)
Adjust the volume up.
Vol + (Volume -)
Adjust the volume down.
Mute
Mute the volume OFF / ON.
Source List
Select input source.
RGB1
RGB2
HDMI/DVI
VIDEO
S-VIDEO
USB
Brightness
Adjust the image brightness level.
Contrast
Adjust the image contrast level.
Color
Adjust the strength of whole color.
This function can only be used under Video signal, S-Video signal, or
component video signal input.
Sharpness
Adjust the image sharpness.
ZOOM
Zoom in/Zoom out and Pan.
Menu
Display or hide the OSD main menu.
UP/Down buttons
Use UP/Down buttons to select an item.
Left/Right buttons
Use left/right buttons to select an item or adjust the value.
Source
RGB1->RGB2->HDMI->USB->Video->S-Video->RGB1.
Enter
Use Enter buttons to select an item.
Auto
Automatically adjust the setting to match the current input.
Blank
Blank the projected image. The time of Blank mode can be set in 15 minutes,
30 minutes or 60 minutes. The projector will shut down automatically after
passing each set time.
About the Tools button:
Set up network configuration, projector network web browser login password and set projector name
from this page.