User manual

37
(=6XLWH(='LVSOD\)XQFWLRQ
Running under WiFi Client Mode:
Projector Ready:
1. Connect an optional Wireless USB WiFi Dongle unit to the projector‟s USB Port (USB
-A).
2. Set the Client mode parameters at \..\settings\WiFi\Client mode\.
*See „WiFi settings‟ (page 52) for more information.
3. Use remove control to select the WiFi Display item at EZ Display interface on the
screen. It will show the Ready for display image on the screen. You can also find the
4-character pass code on the screen.