Installation guide

35
Maintenance
Inside of the projector
In order to ensure the safe use of your projector, please have it maintained
inspected by your dealer about once every year.
Caring for the lens
If the lens is flawed, soiled or fogged, it could cause deterioration of display
quality. After making sure that the projector is cool adequately, lightly wipe
the lens with a commercially available lens-cleaning wipe. Do not touch the
lens directly with your hand. Please handle with care.
NOTE ►After making sure that the projector is cool adequately, lightly wipe
the lens with a commercially available lens-cleaning wipe. Do not touch the
lens directly with your hand.
Other care
WARNING ►Before maintenance, make sure the power cable is not
plugged in, and then allow the projector to cool sufficiently. The care in a high
temperature state of the projector could cause a burn and/or malfunction to
the projector.
►Never try to maintain the inside of the projector by your self.
►Avoid wetting the projector or inserting liquids in the projector. It could
result in a fire, an electric shock, and/or malfunction to the projector
►Do not put anything containing water, cleaners or chemicals near the
projector.
►Do not use aerosols or sprays.
.
.
CAUTION ►Please take right care of the projector according to the
following. Incorrect care could cause not only an injury but adverse influence
such as discoloration, peeling paint, etc.
►Do not use cleaners or chemicals other than those specified in this manual.
►Do not polish or wipe with hard objects.
Downloaded From projector-manual.com Boxlight Manuals