User`s guide

34
VIDEO INPUT
Press POINT LEFT/RIGHT to
adjust value.
Press MENU and ON-SCREEN MENU will appear. Press POINT
LEFT/RIGHT to move the red frame pointer to IMAGE ADJUST.
1
2
Press POINT DOWN to move the red frame pointer to the item
that you want to adjust and then press SELECT. The level of
each item is displayed. Adjust each level by pressing POINT
LEFT/RIGHT.
Move red frame pointer to the
item to be selected and then
press SELECT.
IMAGE ADJUST MENU
IMAGE LEVEL ADJUSTMENT
Press POINT LEFT to decrease contrast, POINT RIGHT to increase
contrast. (From 0 to 63.)
Press POINT LEFT to adjust image darker, POINT RIGHT to adjust
brighter. (From 0 to 63.)
Contrast
Brightness
Press either POINT LEFT or POINT RIGHT to obtain better balance
of contrast. (From 0 to 15.)
Gamma
Press SELECT at this icon to
display other items.
IMAGE ADJUST
Menu icon
Press POINT LEFT/RIGHT to
adjust value.
Press POINT LEFT to lighten color, POINT RIGHT to deepen color.
(From 0 to 63.)
Press POINT LEFT or POINT RIGHT to obtain proper color.
(From 0 to 63.)
Color
Tint
Press POINT LEFT to soften the image, and POINT RIGHT to
sharpen the image. (From 0 to 31.)
Sharpness
Press POINT LEFT to lighten red tone and POINT RIGHT to deepen
tone. (From 0 to 63.)
White balance (Red)
Press POINT LEFT to lighten green tone and POINT RIGHT to
deepen tone. (From 0 to 63.)
White balance (Green)
Press POINT LEFT to lighten blue tone and POINT RIGHT to
deepen tone. (From 0 to 63.)
White balance (Blue)
Press SELECT at this icon to store
the value.
Press SELECT at this icon to
display previous items.
Press POINT LEFT/RIGHT to change progressive scan mode.
Dialog box display is changed to “Off”, “L1”, “L2”.
Off ··· Progressive scan mode to OFF.
L1 ···· Progressive scan mode to ON (for active picture).
L2 ···· Progressive scan mode to ON (for still picture).
Press POINT LEFT/RIGHT to change noise reduction mode. Dialog
box display is changed to “On” to reduce noise (rough parts) of
image. Press POINT LEFT/RIGHT again, to change noise reduction
mode to off.
Noise reduction
Progressive scan
Color temp.
Press either POINT LEFT or POINT RIGHT to Color temp. level that
you want to select. (XLow, Low, Mid or High)
NOTE :
Tint cannot be adjusted when the video system is
PAL, SECAM, PAL-M or PAL-N.
Progressive cannot be operated when “480p”,
“575p”, “720p”, “1035i” or “1080i” is selected on AV
SYSTEM MENU (P32).
L1
15
Store icon
Downloaded From projector-manual.com Boxlight Manuals