User`s guide

20
BASIC OPERATION
ADJUSTING SCREEN
Message disappears after 4 seconds.
Message disappears after 4 seconds.
Zoom
Focus
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
1
Press ZOOM on Top Control or ZOOM ▲/▼ on Remote Control.
The message “Zoom” is displayed.
2
Press ZOOM ▲ or POINT UP to make image larger, and press
ZOOM
▼ or POINT DOWN to make image smaller.
1
Press FOCUS on Top Control or FOCUS ▲/▼ on Remote
Control. The message “Focus” is displayed.
2
Adjust focus of image by pressing FOCUS ▲/▼ or POINT
UP/DOWN.
KEYSTONE ADJUSTMENT
1
Press KEYSTONE on Top Control or Remote Control or select
Keystone on SETTING menu. (Refer to page 36.) Keystone
dialog box appears.
2
Correct keystone distortion by pressing POINT
UP/DOWN/LEFT/RIGHT. Press POINT UP to reduce the upper
part of the image, and press POINT DOWN to reduce the lower
part. Press POINT LEFT to reduce the left part, and press
POINT RIGHT to reduce the right part.
If the projected picture has keystone distortion, correct the image with the KEYSTONE adjustment.
• Arrows are white in no correction.
• Arrow(s) of direction being corrected turn(s) red.
• Arrow(s) disappear(s) at the maximum
correction.
• If you press the KEYSTONE on Top Control or
on Remote Control while the keystone dialog
box is being displayed, the keystone adjustment
will be canceled.

Lens shift


LENS SHIFT ADJUSTMENT
Press LENS SHIFT on Top Control or LENS SHIFT ▲/▼ on
Remote Control. Message “Lens shift” is displayed.
Press POINT UP or LENS SHIFT ▲ to move image up, press
POINT DOWN or LENS SHIFT
▼ to move image down.
Reduce the upper width
with POINT UP.
Reduce the lower width
with POINT DOWN.
Reduce the left part with
POINT LEFT.
Reduce the right part with
POINT RIGHT.
1
2
Downloaded From projector-manual.com Boxlight Manuals