User`s guide

15
BEFORE OPERATION
To ensure safe operation, please observe following precautions :
● Use (2) AA, UM3 or R06 type alkaline batteries.
● Replace both batteries at the same time.
● Do not mix new batteries with used batteries.
● Avoid contact with water or liquid.
● Do not expose the Remote Control to moisture, or heat.
● Do not drop the Remote Control.
● If a battery has leaked in the Remote Control, carefully wipe case clean and install new batteries.
● Danger of explosion if batteries are incorrectly installed.
● Dispose of used batteries according to the battery manufacturer's instructions and local rules.
Press lid down-
ward and slide it.
Remove battery
compartment lid.
Slide batteries into
compartment.
Replace compartment lid.
Two AA size batteries
For correct polarity (+ and
–), be sure battery
terminals are in contact
with pins in compartment.
Remote Control Batteries Installation
1
2
3
Operating Range
Point the Remote Control toward
the projector Receiver Window
when using the remote control.
Maximum operating range for the
Remote Control is about 16.4’ (5m)
and 60° in front and rear of the
projector.
16.4’
(5 m)
60°
16.4’
(5 m)
Used to operate P-
TIMER function. (P21)
LOCK
FREEZE
SELECT
D.ZOOM
MUTE
VOLUME -
MENU
NO SHOW
IMAGE
VOLUME +
KEYSTONE
LASER
P-TIMER
ZOOM
COMPUTER 1
COMPUTER 1
COMPUTER 2
COMPUTER 2
VIDEO
FOCUS
LENS
AUTO PC ON-OFF
P-TIMER BUTTON
Used to adjust zoom. (P20)
ZOOM BUTTON
NO SHOW BUTTON
Used to turn picture into
black image. (P21)
D.ZOOM BUTTON
Used to select DIGITAL
ZOOM +/– mode and
resize image. (P30)
FREEZE BUTTON
Used to freeze picture. (P21)
60°
MENU BUTTON
Used to select MENU
operation. (P17, 18)
COMPUTER 1 BUTTON
Used to select input
source (COMPUTER 1).
(P22)
SELECT BUTTON
Used to execute the
selected item, or to
expand or compress
image in DIGITAL ZOOM
+/- mode. (P30)
POINT (VOLUME +/-)
BUTTONS
Used to select an item or
adjust value in ON-SCREEN
MENU. They are also used
to pan image in DIGITAL
ZOOM +/- mode. (P30)
POINT LEFT/RIGHT buttons
are also used as VOLUME
+/- buttons. (P21)
COMPUTER 2 BUTTON
Used to select input
source (COMPUTER 2).
(P22, 31)
VIDEO BUTTON
Used to select input
source (VIDEO). (P31)
Downloaded From projector-manual.com Boxlight Manuals