Instruction manual

Table Of Contents

Using the Projector

Using the On-Screen Menus

The projector

has six drop-down menus that allow you to make

image adjustments and change a variety of settings. Most of these

adjustments aren’t available directly from the keypad or remote.

To open the on-screen menus, press the

button on the key-

pad or remote. Press

again when you want to close the

menus and save any changes.

To select a menu, use the arrow keys on the keypad or disk

mouse on the remote to move the cursor left and right to

highlight the menu you want. The drop-down menu appears.

FIGURE 20

Drop-down menu

To change a menu setting, use the up and down arrow keys on

the keypad or the disk mouse on the remote to move the cursor

up and down to the item you want to change (the selected item is

highlighted red), then use the left and right mouse buttons (not

the left and right arrow buttons) to adjust a setting. Some sub-

menus, such as Brightness, consist of a slider bar you use to

increase or decrease a value; some submenus, such as Standby

Time, consist of options you scroll through to select the desired

one. All changes are saved when you close the menus.

To access another menu, use the left and right arrow buttons to

move left or right to another menu.

Downloaded From projector-manual.com Boxlight Manuals