Instruction manual
Table Of Contents
- Heading1 - Table of Contents
- Heading1 - Safety Instructions
- Heading1 - Introduction
- Heading1 - Setting up the Projector
- Heading2 - Connecting the CablePro™III to the Projector
- Heading2 - Preparing to Connect Your Equipment to the Projector
- Heading2 - Connecting a Laptop Computer
- Heading2 - Connecting a Desktop Computer
- Heading2 - Connecting a Computer Using a VESA cable
- Heading2 - Connecting a Video Player
- Heading2 - Connecting an External Speaker
- Heading2 - Powering up the Projector and Adjusting the Image
- Heading2 - Turning Off the Projector
- Heading1 - Using the Projector
- Heading2 - Basic Image Adjustment
- Heading2 - Using the Remote Control
- Heading2 - Adjusting the Projector
- Heading2 - Using the Remote and Keypad Buttons
- Heading2 - Using the On-Screen Menus
- Heading2 - Display Menu Functions
- Heading2 - Audio Menu Functions
- Heading2 - Image Menu Functions
- Heading2 - Controls Menu Functions
- Heading2 - Language menu
- Heading2 - Status menu
- Heading1 - Maintenance & Troubleshooting
- Heading1 - Appendix
- Heading1 - Index
12
Setting up the Projector
Connecting a Computer Using a VESA cable
The supplied VESA cable connects to the High Density 15-pin
connector (HD 15) on the projector. This input is designated
Computer 2.
1
Plug one end of the VESA cable into the video connector on
your computer. Plug the other end into the HD 15 connector
on the projector.
2
If you want audio with your presentation, plug the supplied
audio cable into the audio connector on your computer. Plug
the other end into the connector on the projector.
FIGURE 10
Connecting the VESA computer cable to a computer
audio cable
VESA cable
Downloaded From projector-manual.com Boxlight Manuals