User Manual BL WX25NU / X25NU Series 151 NE State Hwy 300, Ste A Belfair, WA 98528 360.464.2119 www.boxlight.
Projector About the Owner’s Manual Please read the owner’s manual thoroughly to ensure correct usage of the projector and its features. After reading, store the owner’s manual in a safe place for future reference. Features 1. Dress up Design 2. Designed for tough environment 3. Side change lamp 4. Side change filter 5. Quick off 6. Advanced Anti-theft features 7. Five auto features (Auto Search, Auto Sync, Auto Ceiling, Auto Keystone and Auto Filter Alert) 8.
Contents About Owner’s Manual Contents......................................................................................................................1 Contents of Your Box.............................................................................................3-A Safety Instructions.....................................................................................................4 Safety Labels......................................................................................................
Contents MENU.......................................................................................................................30 Advanced Menu......................................................................................................30 Presentation Menu..................................................................................................33 Security Menu.........................................................................................................
Safety Instructions Contents of Your Box Check-list of your accessories Please make sure that following items are included in the box, along with the main. If any items missing, contact your dealer. 1. Projector 2. Quick Start Guide 3. O wner’s Manual CD 4.Remote control LASER INDICATOR POWER INPUT MENU LASER MOUSE-L AUTO 4. Power cord 5.
Safety Instructions The projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product. WARNING / CAUTION 4. While connecting, make sure that the shape 1. If a problem occurs of the cable’s connector fits the port to - If smoke or trange odors arise, continued use connect with.
Safety Labels Safety labels are used on or within the projector to alert you to items or areas requiring your attention.
Part Names Projector 1 Touch Keypad Operating system. 1 12 Filter cover Prevents dust and other foreign particles from being drawn into projector. Remove the filter cover to clean the air filter. Front IR receiver 3 Foot adjust button Lock / unlock the adjustable foot. 4 Front adjustable foot 1 Extend and retract to adjust the projection angle. 5 4 3 15 Lens Cover 2 Attach when not using to protect the lens from becoming dirty or damaged.
Part Names Touch Keypad 14 15 8 8 13 9 12 10 11 13 1 INPUT 18 VOLUME + / - Select input source: Sound louder or lower. 9 RGB 1 S-Video MENU Display or hide the OSD main menu Note : 10 1 AUTO If the projector can not be captured the signals within 15 minutes, it will be shut down automatically. Automatically adjust the setting to match the current input. 11 RGB 2 DVI-I Video Y,Pb,Pr (POWER) 14 1 POWER INDICATOR Power On / Off.
Part Names Rear A B P C D E O N M A REAR IR RECEIVER F G L H I J K J SPEAKER K COMPONENT ( Y, Pb, Pr / Y, B USB Cb, Cr) Connect a USB mouse cable to a computer to control computer mouse functions. Input Component signal from a DVD player. C RS232 L VIDEO Serial data port for controlling the projector with a computer or other RS-232 control device. Composite video signal from a video source. D AUDIO IN 1 & O AUDIO IN 2 M RGB OUT Mini jack port corresponds to computer input.
Setting Up Arrangement 1. Before installation, make sure that the projector is turned off and the power cord is disconnected. 2. Do not set up and move the projector, while it is hot. 3. The distance between the projector and screen determines the actual image size. Refer to the table below to determine the screen size at a given distance. Note: The dimensions in the table below are approximate. 16:10 Image size (inch) Distance (cm) Offset(cm) Image size (inch) Distance (cm) Offset(cm) 52 63.6 7.
Setting Up Power ON / OFF Turning on the power Outlet AC inlet 1. Make sure that power cord is firmly and correctly connected to the projector. 2. Remove the lens cover, and the POWER indicator will light up in green. 3. Press POWER button on the control panel or the remote control to turn on the projector. 4. Rotate the focus ring to adjust the focus. WARNING A strong light is emitted when the projector’s Focus ring power is on.
Setting Up Setting Up The Projector The projector supports the following four different projection methods. 1. Front projection 3. Rear ceiling projection 2. Rear projection 4. Front ceiling projection Special installation is required in order to suspend the projector from the ceiling. Please ask your dealer for details.
Setting Up Ceiling Mounted Installation Guide Attach ceiling mount at four-suspension bracket fixing points when suspending from a ceiling. Special installation is required in order to suspend the projector from the ceiling. Please ask your dealer for detals. MAX M4x8 mm For Mounting. Security Anchor The product is equipped with security anchor and PIN LOCK functions to help prevent unauthorized removal projector.
Setting Up Adjusting The Projector’s Elevation Use the adjustable foot at the front of the projector to set the image height. 1 Holding the projector, push the foot adjust buttons to loosen the front adjustable foot. CAUTION 12 Position the front side of the projector to the desired height. 3 Release the foot adjust buttons in order to lock the front adjustable feet. 14 After making sure that the front adjustable feet are locked, put the projector gently atop.
Setting Up How To Connect (Please click here if your projector is with high efficiency filter.) Laptop or desktop computer MOUSE RS-232 AUDIO OUT VGA OUT DVI OUT AUDIO OUT VGA OUT RGB IN S-VIDEO OUT AUDIO IN Y Pb/Cb Pr/Cr VIDEO OUT AUDIO OUT (L)&(R) Before starting, make sure that the projector and computer are both turned off. Connect the computer cable Connect the computer cable from the computer to the projector's RGB IN or DVI-I IN.
Setting Up How To Connect Laptop or desktop computer Connect the audio cable if necessary 1. Please connect the audio cable to the AUDIO IN 1 if the computer cable connected to the projector's RGB IN. 2. Please connect the audio cable to the AUDIO IN 2 if the computer cable connected to the projector's DVI-I IN. 3. Please connect the audio cable to the AUDIO IN 3 if the video cables are connected to the VEDIO / S-VIDEO / Y,Pb,Pr port of the projector.
Remote Control Remote Control Batteries Installation 1. Remove the battery cover. 2. Load the batteries. Make sure the poles are correctly oriented. 3. Close the battery cover. Caution ►Avoid excessive heat and humidity. ►Do not drop the remote control. ► If the remote control will not be used for an extended period, remove the batteries. ► Do not expose the remote control to water or moisture. This could result in malfunction.
Remote Control POWER Power on / operation mode, Standby mode, Cool down mode. INPUT Select input source : RGB 1 RGB 2 S-Video DVI-I Y,Pb,Pr Video MENU Display or hide the On-Screen Display main menu page. Press or Display menu item. LASER INDICATOR POWER INPUT to select On-Screen MENU Press or to select and adjust the function of On-Screen Display menu item or value. LASER LASER Aim the remote control at the screen, press and hold button to activate the laser pointer. MUTE MUTE Mute audio.
Remote Control (Optional) Remote Control Batteries Installation 1. Remove the battery cover. 2. Loading the batteries. Make sure the plus and minus poles are correctly oriented. 3. Close the battery cover. Caution 1. Avoid excessive heat and humidity. 2. Do not drop the remote control. 3. Do not expose the remote control to water or moisture, this could result in malfunction. 4. When the remote control will not be used for an extended period, remove the batteries. 5.
Remote Control (Optional) Power Power on / operation mode, Standby mode, Cooling-down mode. ESC Press ”ESC” button, it will close ”Menu” picture. Vol +/Sound louder or lower. Menu Display or hide the OSD main menu page. Keystone +/Adjusts the vertical keystone function. Still Keep the current image on the Screen. Blank Hide the current image, become black color on the screen. Auto Refresh the current image. Menu up/down, Menu left/right Selecting and adjusting the function of OSD.
Menu Operation How To Operate On-Screen Display 1. You could press "Menu" button. It will be shown blue main menu. The first main menu is " PICTURE" menu. 2. Choose which item you want to enter, you could press up / down /left/ right button of control panel or remote control to adjust item or value.
MENU (PC Mode) Picture Menu Step: 1. Use the ▲ /▼ buttons to select an item. 007 2. Use the ◄ / ► cursor buttons to select an item or adjust the value. Item Selection Description BRIGHTNESS 000/100 Adjust the image brightness level. CONTRAST 000/100 Adjust the image contrast level. SHARPNESS 000/015 Adjusts the image sharpness. NATURAL Natural color. CINEMA DAYLIGHT DISPLAY MODE GREEN BOARD WHITE BOARD BLACK BOARD USER Enhance contrast ratio when displaying DVD contents.
MENU (PC Mode) Audio Menu Step: 1. Use the ▲ /▼ buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item VOLUME MUTE Selection Description 00/40 Adjust the volume. OFF/ON Mute the volume OFF / ON.
MENU (PC Mode) Setting Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item Selection Description H POSITION 000/100 Move the image position horizontally. This function is only selected for computer signal. V POSITION 000/100 Move the image position vertically. This function is only selected for computer signal. PHASE 000/100 Adjust the image sharpness. FREQUENCY 000/200 Set the horizontal scanning frequency.
MENU (Video Mode) Picture Menu Step: 1. Use the ▲ /▼ buttons to select an item. 007 2. Use the ◄ / ► cursor buttons to select an item or adjust the value. Item Selection Description BRIGHTNESS 000/100 Adjust the image brightness level. CONTRAST 000/100 Adjust the image contrast level. SHARPNESS 000/015 Adjusts the image sharpness. COLOR 000/100 TINT 000/100 NATURAL CINEMA DAYLIGHT DISPLAY MODE GREEN BOARD WHITE BOARD BLACK BOARD USER Adjust the strength of whole color.
MENU (Video Mode) Audio Menu Step: 1. Use the ▲ /▼ buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item VOLUME MUTE Selection Description 00/40 Adjust the volume. OFF/ON Mute the volume OFF / ON.
MENU (Video Mode) Setting Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item Selection AUTO KEYSTONE OFF/ON Description Automatically Correct keystone distortion in image. KEYSTONE V -70/+70 Correct vertical keystone distortion in image manually. AUTO SEARCH OFF/ON Search signal source manually or automatically. OFF/ON Turn the Beep of Keypad OFF / ON.
MENU Advanced Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item ZOOM / PAN Selection Description EXECUTE Execute digital zoom and pan function. FREEZE OFF/ON Freeze the current image on the screen. BLANK OFF/ON Hide the image, display a black screen. BLANK POWER 15/30/60 OFF Minute RESET EXECUTE RESIZE Set power off time after blank. Reset all menu function to their factory default values.
MENU Advanced Menu LOGO SETTING This function allows you to customize the start-up logo. IMPORTANT: To implement Logo setting function, please enter PIN code first. Without inputting the PIN code, you cannot modify Logo setting function. Item Selection Description Select Mode( ► cursor button) LOGO MODE DEFAULT USER OFF The factory logo. The image you captured. The blank image. You can select color with background function. LOGO CAPTURE EXECUTE Start to capture the image.
MENU Advanced Menu Logo Capture How to use this function? Select Logo Capture item in the logo setting menu, and press ► button. You can see the red frame to select captured area. Image Use 4 direction buttons to adjust the position of the frame. Press “MENU” to start capturing and display a dialog. Logo Capture In Progress. NOTE ►To capture an image is available only in computer mode. ►The area that can be captured is 512 x 384 dots.
MENU Presentation Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item Selection Description AUTO CEILING OFF / ON Automatically invert the image when the projector is turned upside down, i.e. when the projector is mounted on the ceiling. FRONT EXECUTE Normal projection mode. CEILING EXECUTE Mirror the image vertically, only for the projector mounted upside down.
MENU Presentation Menu Reset Lamp Timer The lamp timer is the time counted after the last resetting. The usage time of the lamp is shown in the PRESENTATION Menu. Pressing the RESET button or the ► button displays a dialog. To reset the lamp time, select the RESET using the ► button. NOTE ► The replacement warning message is set to appear after about 2000 hours of lamp use in order to maintain the initial brightness.
MENU Security Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item PIN LOCK PROTECTION Selection OFF ON 1 ON 2 Description OFF: Turn off PIN lock protection. ON 1: After plugging in AC power, you need to key in PIN code at the first time of use. If the AC power stays unplugged, you do not need to key in PIN code next time when you use the projector. ON 2: You need to key in PIN code every time when you turn on the projector.
MENU Security Menu Step: 1. Use the ▲ /▼buttons to select an item. 2. Use the ◄ / ► buttons to select an item or adjust the value. Item FILTER TIMER RESET FILTER TIMER Selection Description Show the filter use hour. EXECUTE Reset the filter timer after cleaning / changing filter. 500 hours FILTER COUNTER 800 hours 1000 hours Select (500 / 800 / 1000 hours) depending on the environment.(default : 500 hours). Please see as below. MAC ADDR. If purchasing LAN control module, "MAC ADDR.
MENU Auto Filter Alert Auto Filter Alert is in SECURITY category to show the air filter use time and alert user to change filter. Pressing ► cursor button will display a dialog. When the operating time reaches the set time, a warning message will appear on the screen to remind user of filter cleaning / replacing. Filter Replace... Filter has been used for more than 500 hours. NOTE ► Please reset the Filter time only when you replace the filter.
MENU PIN Key In Operation When the projector is turned on and the PIN LOCK PROTECTION is set to [ON], the image will show as on the right side. 1. Press the MENU button on the projector or remote control. Enter PIN code by keypad or remote control. 2. How to enter a PIN code? You can use control panel or remote control. CONTROL PANEL KEYSTONE REMOTE CONTROL The control panel and remote control buttons to enter a sequence of PIN code is like the photo below.
Network Control Software Application LAN NOTE: This Network Control Software Application is an optional function and support model with RJ45 LAN port only. Register the projector(s) which needs to be controlled. " Auto search " can help you to seek the projector(s) source easily. After registering in the work group, you can start to control the projector. Group the projector(s) into different sections. You can monitor the status easily by the sort of group name function in the network.
Before Use Before To Use Network Control Software If the system is Windows 2000, NT 4.0 ,XP ,Vista or Windows 7, the PC should be started by the Administrator. Before starting the Network Control software, please check the following. (1) The computer must have Network Control software installed. (2) The projector should be powered on and the LAN wire is well connected to projector. (3)The LAN module ON/OFF item in SECURITY menu of OSD should be setting ON.
Network Control Software Application Network Control is provided in visual interface, it can help user to monitor and manage the projector(s) status in the local area network. 1. Register the projector(s) which needs to be controlled. " Auto search " can help you to seek the projector(s) source easily. After registering in the work group, you can start to control the projector. 2. Group the projector(s) into different sections.
Network Control Software Application There are two ways to connect to the network control: Auto IP address setting (DHCP setting is "ON"): (1) Enable DHCP from the projector on-screen-display menu, under "SECURITY \ LAN SETTING". (2) Please wait for the PC server to release IP address to the projector. (3) Enter "Given IP address (For example http://192.168.1.176/)" into the address bar of the web browser and press “Enter” key or click “Go” button.
Network Control Software Application Item Setting description: ITEM SETTING Status Control Network Alert Schedule DESCRIPTION Show current projector status and network configuration settings. Select projector’s detailed setting from this page. Set up network configuration and password from this page. Show and setup Alert configurations. Show and set up Schedule, including Weekly Schedule and Specific Day. If the Administrative & User password is enabled, select your User Name and enter password to login.
Network Control Software Application Status : Show current projector status and network configuration settings. ITEM SETTING DESCRIPTION IP Address Show current IP address. System Status Show if projector is Power On or Inactive *. Projector Name Show projector name. Group Name Show group name. Lamp Hours Show lamp used hours on current projector. Filter Hours Show filter used hours on current projector. Input Source Show current input source. Date(y/m/d) Show date set on current projector.
Network Control Software Application Control: Select projector’s detailed setting from this page. ITEM SETTING Basic Projector Name System Status Power Switch Input Source Date Setting Time Setting Picture Brightness Contrast Sharpness Color Tint Display Mode Audio Volume Mute Setting V Keystone Auto Sync Auto Search Advanced Freeze Resize Reset Presentation Projection Lamp Mode DESCRIPTION Show projector name on the current projector. how if projector is Power On or Inactive .
Network Control Software Application Network : Set up network configuration and password from this page. ITEM SETTING Network DHCP IP Address Subnet Mask Gateway DNS Server Group Name Projector Name Password:ADMIN Administrator New Password Confirm Password Password:USER User New Password Confirm Password DESCRIPTION Assign an IP address to the projector from the DHCP server automatically. Set up IP Address when DHCP is disabled. Set up Subnet Mask when DHCP is disabled.
Network Control Software Application Alert: Show and setup Alert configurations. When problem occurs to the projector, it will automatically send e-mail to remind user. How to opearte: 1. Enter Email Setting columns. 2. Enter SMTP Setting columns. 3. Select Alert Condition. Multiple choices are fine. 4. Press Submit to confirm. 5. After completing Alert Setting for the first time, it is recommended that you press Issue Test Mail to see if the attendees can receive the e-mail.
Network Control Software Application Schedule : Show and set up Schedule, including Weekly Schedule and Specific Day. Weekly Schedule To power on and power off projector based on Weekly Schedule. How to set up: 1. Choose week days. 2. Set up power-on or power-off time. ( Please be sure that the interval between power-on and off setting is more than 5 minutes.) 3. Enter Input Source and select input source. 4. After completing setting, press ADD to confirm. 5.
Before Use Activate Network Control Software Execute the Network Control Software. onitor window below appears.
Before Use Projector Auto Search. Click the (Projector search), located projector will show on the network correctly. (Graph2) NOTE When the security warning window appears while Network Control is executing, please select "Unblock" to decontrol area network linking against from System Administer. Click (search again), the projector which is well connected with a PC will be shown.
Before Use Projector Auto Search. Click (register projector), the projector information will show on the monitor window. Click button (exit), it will cancel the registered item then return to register table. Monitor window Projector Auto Search can rank group names or display names by clicking the monitor window title (Group Name) or (Projector Name). This will help you easily to understand projectors status.
Before Use Projector Auto Search. After registering, you can click click button (Data single capture) in the tool bar or button (Start Auto Scan) running in this program to monitor the projector. NOTE When pressing "About " button for help, you will see icons explained as in the chart.
Before Use Modify The Projector Setting If modifying the registered projector setting is needed, please move your cursor to the data table and click the item that you would like to modify, the detail will be shown on the right side table. < Graph 5 > : Register Table fter setting, you can save the data by clicking A button or cancel by clicking button.
Registering And Configuring The Projector Delete Select the registered projector in monitor window. Click mouse right key and select " Delete " to erase the registered projector data. < Graph 6 > : Register Table.
Registering And Configuring The Projector Projector Setting Select the registered projector in monitor window. Click mouse right key and select "projector setting" to modify the registered projector data. After finishing the setting, button or cancel by clicking button. you can save by clicking < Graph 7 > : Register table. < Graph 8 > :Setting table.
Registering And Configuring The Projector Projector Setting Click button (system setting) to modify system alert setting.
Registering And Configuring The Projector System Setting Monitor Item Description Lamp Timer Lamp timer from projector. Air Filter Alert Air Filter Timer from projector. System Status/ Tempeture Level System Status and Tempeture. Level from projector in Power On status. Input Source Input Source from projector in Power On status. < Table 2 > Default Setting Item Lamp Timer Alert (Hr.) Filter Timer Alert (Hr.) Auto Detect Timer (minutes) Description Default Setting Includes 1000/1500/2000 Hours.
Registering And Configuring The Projector Link Select the registered projector in monitor window. Click mouse right key and select " Link " to show up the control panel table and the projector connected status.
Control Panel Window Introduction Power Control Icon Name Power on Power off Input Source Icon Name Video S-Video Y,Pb,Pr DVI-I RGB 1 Change Input Source Function Key Icon Name Icon Name Up Freeze Down Blank Left Keystone Correction + Right Keystone Correction - Menu Increase Brightness Auto Sync Decrease Brightness Mute Higher Contrast 56
Control Panel Window Introduction Function Key Icon Name Lower Contrast Zoom In Zoom Out Volume Up Volume Down Projector Status Icon Name System Status Input Source Status Lamp Timer Air Filter Timer 57
Control Panel Window Introduction Network Control Window introduction Icon Name Description Scan all Capture the all registered projectors’ information one time only. Start Auto Scan According to the system setting, get the projector information automatically. Stop Auto Capture Stop scanning the projector information. Auto Search Search the projector in the same network to register and modify the setting. Open Project File Open project file which was saved.
Maintenance of Projector Air Filter When a warning message appears to remind you to clean the air filter, please replace a new one as soon as possible. Please check and clean the air filter periodically. Replacing the Air Filter When the use time reaches the filter counter time, the projector will display a message that indicates to replace a new filter. If there is no spare air filter available, please contact your dealer. New one Turn off the projector, and unplug the power cord.
Maintenance of Projector Lamp 1. If you want to replace new lamp, but the projector was just turned off, please let the projector cool down and unplug power cord at least 60 minutes. 2. If the projector is mounted in the ceiling, contact your dealer to replace the lamp. Replacing New Lamp 1. Remove the lamp door. 2. Loosen 2 screws of the lamp holder. Take the handle on the top of the lamp, pull out the lamp straight off the projector. 3. Insert new lamp, lock the lamp door firmly with 2 screws. 4.
Maintenance of Projector WARNING The projector uses a high-pressure mercury lamp. The explosion of lamp with a loud bang or burn out could possibly cause injury or a fire. When the bulb burts, it is possible for shards of glass to fly into the lamp housing; and for gas containing mercury to escapefrom the projector’s vent holes. If the lamp has broken, do not check the inside of the projector. Please ventilate the room immediately.
Maintenance of Projector Other Care Cleaning The Lens If the lens is dirty and dusty, display quality maybe decreased. Before cleaning the lens, please make sure that the projector is cool down adequately. After the projector has cooled down adequately, lightly wipe the lens with the available lens-cleaning cloth. Do not touch the lens directly with your hand. Additional - In order to ensure the safe use of your projector, please contact your dealer to inspect about once a year.
Troubleshooting Indicator The power and lamp indicators show the status of the projector. Before requesting repair, check the projector status using the chart below. If the problem cannot be resolved, contact your dealer. In normal status~~~ POWER Blinking In Green Lighting In Green Lighting In Green LAMP CONDITIONS DESCRIPTION Off Stand by mode Projector is ready to be turned on. Off On mode Projector is on and operating.
Troubleshooting Error For Machine Defects The following problems may be confused with a machine defect. Check and follow the table. If it couldn’t be improved, contact your dealer. Symptom Cause / Remedy The power cord is disconnected. Plug the power cord into an AC outlet. Intending to turn on the projector again during the cool down mode. Wait until the cool down mode has completed. There is no lamp and/or lamp cover is not firmly closed.
Troubleshooting Error For Machine Defects Symptom No audio Remote control is not working. Cause / Remedy The projector is not connected correctly. Check audio cable if connect correctly. The volume is set to minimum. Adjust the volume. Mute is turned on. Press the MUTE button. No battery. Before using the remote control, please check the battery of remote control. Remote signal is obstructed. Remove the obstacle between projector and remote control.
Troubleshooting List of Supported Monitor Displays Computer mode Signal Refresh Rate (Hz) Resolution (dots) VGA 60 640x480 VESA 60/72/75/85 640x480 SVGA 56/60/72/75/85 800x600 XGA 60/70/75/85 1024x768 SXGA 70/75 1152x864 SXGA 60/75 1280x960 SXGA 60 1280x1024 WXGA 60/75 1280x800 WXGA+ 60/75/85 1440x900 SXGA + 60/75 1400x1050 UXGA 60 1600x1200 WSXGA+ 60 1680x1050 MAC 67 1280x1024/640x480 MAC 75 832x624 MAC 75 1024x768 MAC 75 1152x870 Signal Refresh Rate (Hz)
Appendix Menu Tree (PC Mode) Brightness PICTURE Contrast Sharpness Display Mode AUDIO Volume Mute Natural Cinema Daylight Green Board White Board Black Board User PRESENTATION Reset Lamp Timer V Position Phase Frequency PIN Lock Protection Auto Keystone Off On 1 On 2 Modify PIN V Keystone Auto Sync Lamp Mode Front Ceiling Rear Ceiling And Rear Lamp H Position SETTING Auto Ceiling SECURITY Filter Timer Auto Search Reset Filter Timer Zoom / Pan Filter Counter Freeze 500 hours 800 hou
Appendix Menu Tree (Video Mode) Brightness PICTURE Contrast Auto Ceiling Sharpness PRESENTATION Color Tint Display Mode AUDIO Volume Mute Lamp Natural Cinema Daylight Green Board White Board Black Board User Reset Lamp Timer PIN Lock Protection Filter Timer Auto Keystone Reset Filter Timer Auto Sync Filter Counter Auto Search Close Caption Freeze Blank Power Off Blank Reset Resize Language Select Source Logo Setting 500 hours 800 hours 1000 hours MAC ADDR.
Appendix Appearance
