User guide

Your Sky±HD box connections

Switching on Dolby® Digital audio

With the digital audio outputs you can connect your Sky±HD box to a

compatible home cinema system and listen to programmes broadcast

in Dolby® Digital audio. For this you need an optical or coaxial cable

(not supplied) and you need to change the default settings on your

Sky±HD box:

1 Press services, scroll right to Settings

and press select.

2 Highlight Digital Audio Output and use left/right to choose Dolby D.

3 Press the

green button (Save Settings) when you’re done.

Some older amplifiers may not support Dolby® Digital audio.

If you’ve connected your Sky±HD box to a home cinema system using one

of the digital audio outputs, you may find the audio and video are out of

sync. If this happens, you can easily change the sound settings to correct

the sound.

You can change the settings as follows:

1 Press services, scroll right to Settings

and press select.

2 Highlight Digital Audio Output Delay and press select.

3 In the Digital Audio Output Delay banner, use the left/right arrow to

choose the setting you want. In this preview mode, you can hear the

results as you adjust the level.

4 Press select then press the

green button to save the setting.

To change the delay setting without a preview, highlight Digital Audio

Output Delay and use the left/right arrow to choose the right setting.

Press the

green button (Save Settings) when you’re done.

Adjusting sound synchronisation