Specifications

7
Operation (cont’d)
To manually feed paper (max. 6 sheets) or lubricant sheets.
• The shredding process is initiated by photo sensors in the
paper feed opening. Insert a maximum of 6 sheets of paper
into the paper feed opening; shredding begins automatically.
When shredding is complete, the cutting system
automatically stops after approximately 3 seconds.
• For maintenance, shredder lubricant sheets should be fed
in the paper feed opening as well.
To clear paper jam.
• If paper jam occurs press and hold the “Reverse” button to
back paper out of the paper entry. Try pulling gently on the
paper to remove it from the shredder. Alternate between
forward and reverse, as needed, until the jam clears.
• On LCD, REVERSE will be displayed.