Specifications

9
The doors can be locked to avoid confidential papers from being taken out of the
paper tray by other people.
To LOCK a shred job.
Press “Lock” button. ENTER PASSWORD will ash on LCD.
Enter any 4-digit PIN. Be sure to remember the PIN. Press
“Enter” button.
COVER UNLOCK will change to COVER LOCK on the LCD.
• Both doors will be locked mechanically. The locking process
takes approximately 3 seconds. After the locking process is
completed, ashing COVER LOCK on LCD becomes steady.
If the locking process cannot be completed within
7 seconds the locking process is cancelled.
To UNLOCK a secured shred job in process.
Press “Unlock” button. ENTER PASSWORD will ash on LCD.
Enter the 4-digit PIN. The code is displayed.
Press “Enter” button. (In case the PIN has been
forgotten, use the key supplied to UNLOCK on
the right side of shredder.)
COVER LOCK will change to COVER UNLOCK on
the LCD.
• Both doors will be unlocked mechanically. The unlocking
process takes approximately 3 seconds. After the unlocking
process is completed, ashing COVER UNLOCK on LCD
becomes steady.
NOTE: The paper tray doors will automatically UNLOCK
once the shred job has been completed.
To CANCEL password.
If the locking or unlocking process needs to be interrupted,
press “Cancel” button. The locking or unlocking process will
be cancelled.
If the input of any password digits is wrong during the Locking
or Unlocking process, press “Lock” or “Unlock”
button. The password is reset again.
To manually STOP a shred job.
Press “STOP” button.
To power OFF the shredder.
Toggle OFF the power switch. Power switch is on the top of
the machine.
NOTE: Energy-Saving Technology — The RS700 will
automatically toggle OFF if idle for 30 minutes.
To resume power just toggle switch back ON.
Locking for Secure Shredding