User manual

Input selector

After the unit is powered on, pressing the buttons◄ and ► next to the LEDs inputs indicators select desired

input.

Volume

Adjust the volume to the desired level, using the large knob on the front panel.

Connecting a headphone

Connect the headphones to the ¼“ (6,3mm ) jack socket on the front of the unit. Once headphone jack is

connected into the socket, rear panel outputs are muted.

+6dB button

gain of the preamplifier for all inputs is increased by 6dB if pressed

Bluetooth connection

Make sure the antenna is attached to its connector In9 BT on the back panel prior using Bluetooth. If the Pair

LED is on, active audio connection with Bluetooth device is established.

Pairing with Android devices

Open Settings and tap on Bluetooth. Turn on Bluetooth and tap on Scan. Searched devices will show up.

Tap on MaiA DS2 and confirm presented pairing code on your Android device. Then press Pair button on

MaiA DS (alternatively Blank button on remote control) when the blue Pair LED starts blinking. When paired

with MaiA DS2, your Android device will show "Connected to media Audio". Now you can play music from

your Android device over Bluetooth to MaiA DS2.

Older devices may request a pairing code. Enter "0000" and confirm. No more confirmation on

MaiA DS2 is then needed.

Bluetooth pairing with Apple devices

Tap on Settings, tap on Bluetooth, turn on Bluetooth. Your device will automatically start searching for

available devices. Tap on MaiA DS2 and confirm by pressing Pair button on MaiA DS2 (alternatively Blank

button on remote control) when the blue Pair LED of is blinking.

Bluetooth pairing with Windows smartphones

Open Settings and tap on Bluetooth. Turn on Bluetooth and a scan for available devices starts automatically.

Searched devices will show up. Tap on MaiA DS2 and confirm presented pairing code on your Windows

device. Then press Pair button on MaiA DS2 (alternatively Blank button on remote control) when the blue

Pair LED is blinking. When paired with MaiA DS2, your Windows device will show "Connected to media

Audio". Now you can play music from your Windows device over Bluetooth to MaiA DS2.

Bluetooth pairing with Windows PC

For example - Windows 7

operating system:

 Control Panel  Devices and Printers Add device

 Select MaiA DS2 (make sure no other Bluetooth device is connected)  Confirm by pressing Pair button

on MaiA DS2 (alternatively Blank button on remote control) when the blue Pair LED is blinking

 PC screen will display this question: “Confirm if code is identical”

 Select “Yes” and continue

 Select MaiA DS2 from list of devices with double-click

 Select “Listen to music” and make sure that “Bluetooth Audio” is selected as standard device