Specification Sheet

©2019 BOWMAN® Manufacturing Company, Inc. All Rights Reserved. Product specications subject to change without notication. Consumables not included. KS0100420TDSc
KS010-0420 - Installation/Characteristics & Care
Information subject to change without notice. Dimensions are approximate. (Not to scale)
BOWMAN Dispensers
20325 71
st
Ave NE, Suite D, Arlington, WA 98223
800.962.4660 • www.BowmanDispensers.com
Parts included:
• Column
• Base
• Hardware
• (8x) Screws: (4x) for stand, (4x) included
to attach companion product (Phillips type
10-32 x 5/16”)
Tools Required:
• Phillips screwdriver
• To secure base to column, turn column upside down (with top plate down).
• Place base inverted, as shown, on column.
• Use Phillips screwdriver to secure base to column with (4x) screws (10-32 x 5/16”).
• Turn stand right side up, so the base is on the oor.
1
2
Installation Instructions/Material Care & Construction
Floor Stand
KS010-0420
Designed for Long-Term Use
Our steel dispensers and stands
are coated with polyester powders
which makes them highly resistant to
corrosion.
Powder-coated steel is ideal for
dispensers used in a healthcare or
an industrial setting because it is
impact resistant and is not effected by
extremes in temperature.
Dispensers and stands made
of powder-coated steel are both
attractive and functional, providing
years of service.
For best results, clean by washing the
surface with a diluted solution of a
mild, non-abrasive detergent in cold or
warm water and a non-abrasive cloth.
Standard hospital cleaning supplies
can be used. Dry with a soft cloth. Do
not use any solvent-based materials,
abrasives (e.g. Scotch-brite, steel
wool), or apply excessive force during
cleaning.
Powder-Coated Steel
Care and ConstructionInstallation
Material Characteristics
Care and Cleaning
Always mount dispensers securely prior to loading with product.