Owner`s manual

Bowflex Xceed
™
Plus Owner’s Manual
7
Power Rod
®
Resistance
Power Rod
®
resistance rods are made from a special
composite material. Your rods are sheathed with a
protective black rubber coating. Each rod is marked
with its weight rating on the “Rod Cap.”
Adjusting and
Understanding
the Resistance
The standard Bowflex
Xceed
™
Plus home gym
comes with 310 pounds
of resistance (one pair
of 5 lb. (2.25 kg) rods,
two pairs of 10 lb. (4.5
kg) rods, one pair of
30 lb. (13.5 kg) rods,
and two pairs of 50 lb.
(22.5 kg) rods.
If you upgraded to a
410 pound (186 kg)
capacity you will have an
additional pair of 50 lb. (22.5 kg) rods, respectively.
Hooking Power Rod
®
Resistance Rods
to the Cables
You may use one rod or
several rods in combination,
to create your desired
resistance level.
To hook multiple rods up
to one cable, bend the
closest rod toward the cable
and place the cable hook
through that rod cap. You
can then hook up the next
closest rod through the same
cable hook.
Hooking up the closest
rod first prevents rods from
crossing over the top of
one another.
Safety
When hooking the Power
Rod
®
resistance rods to the
cable hooks, do not stand
directly over the tops of
the rods. Stand off to one
side when connecting and
disconnecting the Power
Rod
®
resistance rods from
the cables.
When You Are Not Using Your
Bowflex Xceed
™
Plus Home Gym
Disconnect the cables from
the Power Rod
®
resistance
rods when your are not
using your Bowflex Xceed
™
Plus home gym. Use the
rod binding strap included
with your machine to
bind all the rods together
at the top. You can also
place your cables and grips
through the strap to keep
them out of the way.
To Order Additional Sets
of 50 lb. (22.5 kg) Power Rod
®
Resistance Rods,
Please Call 1-800-628-8458
Getting to Know Your Machine