Owner`s manual

33
Troubleshooting
Speed dependent grinding or
scraping noise
Belt alignment Check walking belt alignment.
Belt contact with metal guides
under Treadle can make a loud
grinding sound. If belts are
misaligned, adjust walking belt.
Rollers Contact Customer Care for
further assistance.
Hesitation or belt slipping when
walking on unit
Walking belt tension Adjust walking belt tension by
following the “Adjusting the
Walking Belts” procedure.
Lubrication Consult lubrication chart and
apply as necessary.
“Tick” sound once per revolution
or scraping noise from under
Treadle
Belt alignment Belt seam may be contacting
metal belt guide under Treadle.
Slight adjustment of belt
should alleviate noise. Follow
the “Adjusting the Walking
Belts” procedure.
Treadles do not operate correctly Dependency and Heim Joint Consult ‘One Way Bearing
Inspection and Adjustment”
and “Heim Joint Inspection”
procedures.
Treadles Contact Customer Care for
further assistance.